Basic Info.
Cab Location
Not Adjustable
Type
Powered Pallet Truck
Fork Size (L*W*T)
40X100X920mm
Minimum Ground Clearance
95mm
Length to Face of Fork
1430mm
Mast Lowered Height
2060mm
The Outer Width of The Fork Arm Carrier
720mm
Travel Speed,Full Load/Unload
6/8
Lifting Speed,Full Load/Unload
0.13/0.2
Transport Package
International Standard Packaging/Diesel Forklift
Specification
CE, ISO, CQC, IAF, CANS
Product Description
The usage and maintenance of the electric forklift is lower than the internal combustion forklift.As the growth of the usage,the gap will become bigger and bigger.
The steering system,control system and braking system of the electric forklift are all controlled by the electrical signal,To operate it more comfortably.
More widely using range,and can be used indoor and outdoor.
Controller and motor are all closed structure,Can be provided more protection.
Braking system with functions of regenerative braking, to conserve energy.
Carbon emissions, exhaust emission ,and dust emissions to zero, and also zero pollution to the environment
Characteristic |
Model | | FBS05 | FBS08 | FBS10 | FBS12 | FBS15 |
Power Type | | Electric | Electric | Electric | Electric | Electric |
Operation type | | Seated | Seated | Seated | Seated | Seated |
Rated Capacity | kg | 500 | 800 | 1000 | 1200 | 1500 |
Load Center | mm | 400 | 400 | 400 | 400 | 400 |
Front Overhang | mm | 182.5 | 182.5 | 182.5 | 243.5 | 183.5 |
Wheelbase | mm | 1070 | 1070 | 1070 | 1150 | 1295 |
Weight |
Service Weight(Including battery) | kg | 1195 | 1475 | 1615 | 1940 | 2162 |
Axle load,Loaden driving wheel/Steering wheel | kg | 1420/275 | 1910/365 | 2195/420 | 2670/470 | 3106/556 |
Axle load,Unload driving wheel/Steering wheel | kg | 565/630 | 700/775 | 765/850 | 800/1140 | 801/1361 |
Tyre,Chasis |
Tyre type,Driving wheel/Steering wheel | | PU | PU | PU | PU | PU |
Front wheel size(Diameter/width) | mm | 230/75 | 230/75 | 230/75 | 285/108 | 285/108 |
Steering wheel size(Diameter/width) | mm | 230/75 | 230/75 | 230/75 | 230/75 | 260/105 |
Driving wheel,Steering wheel no.(x=Driving wheel) | | 2/1x | 2/1x | 2/1x | 2/1x | 2/1x |
Front Wheel Tread | mm | 830 | 830 | 830 | 830 | 910 |
Size |
Mast Lowered Height | mm | 2060 | 2060 | 2060 | 1985 | 1985 |
Free Lift Height | mm | / | / | / | 120 | 120 |
Standard Mast lift height | mm | 2950 | 2950 | 2950 | 2930 | 2930 |
Mast Extended Height | mm | 3860 | 3860 | 3860 | 3845 | 3906 |
Overhead Guard Height | mm | 1980 | 1980 | 1980 | 1985 | 1985 |
Seated Height | mm | 975 | 975 | 975 | 970 | 970 |
Traction pin center height | mm | / | / | / | / | / |
Overall Length | mm | 2350 | 2350 | 2350 | 2530 | 2620 |
Length to face of fork | mm | 1430 | 1430 | 1430 | 1610 | 1700 |
Overall Width | mm | 944 | 944 | 944 | 948 | 1020 |
Fork Size | mm | 40x100x920 | 40x100x920 | 40x100x920 | 40x100x920 | 40x100x920 |
Fork arm Carrier Type | | A | A | A | A | A |
The outer width of the fork arm carrier | mm | 720 | 720 | 720 | 800 | 720 |
Ground clearance,Laden (The bottom of mast ) | mm | 90 | 90 | 90 | 78 | 78 |
Min.Ground clearance of body | mm | 95 | 95 | 95 | 95 | 95 |
Aisle width for pallets 1200(W)X1000(L) | mm | 2830 | 2830 | 2830 | 2975 | 3076 |
Aisle width for pallets800(W)X1200(L) | mm | 2945 | 2945 | 2945 | 3090 | 3189 |
Turnning Radius | mm | 1330 | 1330 | 1330 | 1450 | 1549 |
Performance Parameter |
Travel speed,Full load/Unload | km/h | 6/8 | 6/8 | 6/8 | 6/8 | 6/8 |
Lifting speed,Full load/Unload | m/s | 0.13/0.2 | 0.13/0.2 | 0.13/0.2 | 0.13/0.2 | 0.11/0.2 |
Falling speed,Full load/Unload | m/s | 0.14/0.125 | 0.14/0.125 | 0.14/0.125 | 0.14/0.125 | 0.22/0.2 |
Gradeability(Laden/Unload) | % | 6/8 | 6/8 | 6/8 | 6/8 | 6/8 |
Travel brake Type | | hydraulic+Mechanical | hydraulic+Mechanical | hydraulic+Mechanical | hydraulic+Mechanical | hydraulic+Mechanical |
Motor,Power Source |
Drive motor rated power S2 60Minute | Kw | 1.5 | 1.5 | 1.5 | 1.5 | 3.3 |
Lifting motor rated power S3 15% | Kw | 2.2 | 2.2 | 3 | 3 | 4 |
Battery (Voltage/Capacity)K5 | V/Ah | 24/210 | 24/210 | 24/210 | 24/360 | 24/500 |
Battery Weight | kg | 210 | 210 | 210 | 360 | 500 |
Other Data |
Drive Control Type | | AC | AC | AC | AC | AC |
Steering Type | | hydraulic+Mechanical | hydraulic+Mechanical | hydraulic+Mechanical | hydraulic+Mechanical | hydraulic+Mechanical |
Noise Level | Db(A) | 70 | 70 | 70 | 70 | 70 |
1. The parameters in the table are of the standard model. For more information, please contact us. 2. The parameters are subject to change without notice. |
Main configuration |
Unit | Brand | Place of Origin |
Drive Motor | Xindali | China |
Oil pump Motor | BUCHER | Switzerland |
Drive Controller | ZAPI | Italy |
Steering Controller | ZAPI | Italy |
Dashboard | ZAPI | Italy |
Accelerator | COMSYS | Korea |
Contactor | Albright | Britain |
Connector | AMP | USA |
Battery | Option |
The parameters are subject to change without notice. |
Characteristic Configuration
1. Regenerative brake,Slope slip resistance.AC controller.Guaranteed the driving safety.
2. Low-noise gear pump.
3. Larger armrest for up and down low position pedal.Given the adequate consideration in humanity demands.
4. Dual-motor drive mode, The ac drive control system, Efficient maintenance-free AC motor, high pulling torque, well-done in climbing slope. powerful traction, arge,powerful vehicles,make sure the truck keep stalbe over rough roads.in the mean time,then the battery can be used for long time.
5. Safety and comfortable seat,Increase the driver's comfortability.
Safety
1. The seated switch,When left the seat,the vehicle can not go forward or lifting.
2. Emergency switch postconditions(near the seat) press conveniently.
3. Turn slowdowns, When the vehicle turning, the truck slow down,it will be very safe. The low battery protection function.when the battery voltage lower than the min battery voltage (20%),the speed will reduce,lift will be impossible.
4. Lifting overload protection.Mast Explosion-proof structure design.Improve the vehicle safety.
5.The integrated welding truck frame and safe guard,the safety performance is good.
Maintenance
1. AC traction motor, maintenance free. Performance is more reliable.AC motor adopt external type encoder. Maintenance Conveniently.
2. Hour meter displays fault code.Greatly facilitate maintenance.
3.Open the body cover by inspecting the controller, hydraulic motor pump and all key components. Makes the maintenance much more convenient.
4. Press-on load wheel reduces the maintenance cost.
5. Reasonable collocation for drive motor,pump motor , Brake pedal .Optimized line pipe.Easy to open pedal. makes the inspeciton ,maintenance and replacement for components much more convenient.
Contact
Danae Shen
Website:shschim168.en.made-in-china.com
Address:
A-1105, Jinjiang building, middle Changjiang Road, Hefei, Anhui, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing, Security & Protection, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, ISO 20000
Company Introduction:
Shenchuan (Shanghai) Heavy Industrial Machinery Co., Ltd. Has been always adhering to the idea of "all service to meet customers′ needs", breaking through technology, manufacturing the finest products, improving service with our globalization vision.
We have developed a variety of international advanced products joint with world-renowned industrial equipment manufacturers, such as: ZF, TEREX, and a variety of sophisticated products with independent intellectual property patents together with well-known Chinese universities in the area of machinery, electronics, physical mechanics etc.
Shenchuan Heavy Industrial has become one-stop storage and logistics solution leader and the most powerful supplier of material handling integrated systems. We have five divisions: Logistics Systems Division (sub-brand JEAKUE); Engineering Machinery Division (sub-brand JEADE); Agricultural Machinery Division (sub-brands JEATN); Construction Machinery Division (sub-brands JEADA); Mining Machinery Division (sub-brand JEAYO).
We will provide comprehensive and multidimensional supply chain service for global customers with our most optimized scheme, best quality products, most attentive service and most competitive price, to reduce the maximum supply chain cost for customers and increase the production efficiency.
We promise Create high-quality products with craftsman spirit and serve customers with innovative spirit!
Warmly welcome customer overseas inquiry our products and visit our factory! We have the big passion do business with all of yours! We have in this line over 20 years, have excellent experice deal in all problems during our overseas coopeation!